1/4-20 Stainless Steel Serrated Flange Hex Cap Screw Bolt (Choose Length & Qty) PRODUCT SPECIFICATIONS Item Condition: New Brand:Unbranded Fastener Type: Hex Cap Serrated Flange Bolt Grade/Material: 18-8 Stainless Steel Body Diameter: 1/4″, Max 0.250 – Min 0.245 Thread Pitch: 20 UNC Thread Type: Course UNC Thread Direction: Right Hand Bolt Length: 3/4″ Length From: Under Head Thread Length Min: 3/4″ Thread Length Max: 3/4″ Head Type: Hex Flange Width Across Flats: 3/8″, Max 0.375 – Min 0.368 Head Height: Basic Max 0.263 – Min 0.253 Socket Size: 3/8″ Socket Tensile Strength PSI: 100,000 – 125,000 Yield PSI: 55,000 – 75,000 Hardness: 100 Rockwell B Width Across Corners: Max 0.431 – Min 0.428
1/4in x 1/16in N52 Strong Round Magnets Rare Earth Magnets Specification:Dimensions: 1/4″ x 1/16″ thick Tolerances: ±0.01in x ±0.01in Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Max Operating Temp: 176ºF (80ºC) Pull Force: Approx. 1.47 lb Material Features:Neo Magnets are made of a brittle material. These magnets are not as strong as steel. They are more like a brittle ceramic. If you let two magnets slam together, they can crack and break. This is true for magnets large and small. WARNING!!! Strong magnets should Keep away from Ironware and some easily magnetized iron products, such as monitors, bank cards, computers, televisions, mobile phones and other. These magnets are very powerful which should be handled with great care. Without parents supervised do not allow children to playing magnets as they could get injured. Especially pay attention to the small magnets , please place in somewhere children can’t reach place.
Lot of 5 PCS 1/4″ 4 Flute SE Regular. Manufacturer direct pricing. Finish: Bright. Length of Cut: 3/4″. Center Cutting: Yes.
TIALN COATED. TiALN COATED. 1/4″ 4 FLUTE SE REGULAR BALL NOSE. 3/4″ LENGTH OF CUT. Durable and easy to install and replace. This product is made of solid hard alloy.
Tool Coating: AlTiN Coated. AlTiN Coated for improved performance and tool life in harder materials or high temperature applications. End Mill Type: Double End Mill. End Mill Bits are used for side milling, end milling, finish machining, etc.
Tool Coating: AlTiN Coated. 4 Flute 1/4″ x 3/4″ x2-1/2″ Ball Nose. End Mill Type: Ball Nose End Mill. End Mill Bits are used for side milling, end milling, finish machining, etc. ALCrN Coated for improved performance and tool life in harder materials or high temperature applications.